Dosing machine STS809
For clean liquids with low viscosity and low volume up to 1 liter.
Great application for
Power supply voltage
Maximum water capacity
Fluid operating temperature
Preparation for work and adjustment
The machine is placed on a level surface. Check the installation of the suction filter of the suction hose (front of the housing) and the installation of the outlet valve of the metering hose - care is taken of the direction. The dosing stand is mounted - the arm with the bracket is transverse. The end of the metering hose with the valve is mounted in the clamp. The suction filter is placed in the tank, below the liquid level. The position of the machine must be higher than that of the vessel. The pedal switch is connected by a plug at the rear and placed in a convenient place to use. Plugs the power cord into the rear socket and plugs into the power supply. The machine switches on from the key to the power cord. The logo, machine name and software version are displayed on the display and then switches to the operating mode (of the last running program). By repeatedly pressing the program selector button, we select the zero program. Changing the parameters for it is easy to access and thus convenient for quick setup. The PUMP SPEED, WORK TIME, PAUSE TIME buttons are used to select parameter, number, decrease and increase. The change digit is indicated by a blinking underscore. The current parameter is stored when moving to the next one.
Dosing machine. Fill your products easier!
Our STS809 Liquid Dosing and Filling Machine is suitable for low viscosity clean liquids (without solids). For example, water, oil, olive oil, rare lotions, wine, fuel and other cosmetic, chemical and food products. The control is realized with a microcontroller, which enables a smooth and accurate dosing of the product by controlling the pump in time and speed. Our liquid dispenser has 9 separate programs in which you can store and save different parameters. With these programs, you can easily dose different products without wasting time setting up. Semi-automatic fluid filling machine has a counter, which allows reading of dosages / fillings. The operation can be performed in two separate modes – Single mode and Continues mode. In single mode, the start is supplied by an external start pedal. When the pedal is pressed, the machine will charge once, stop and wait for another push. The second mode of operation contains a parameter Pause time, after which, the machine itself performs dosing, stops waiting for the set time and re-doses. This is repeated in a continuous cycle.
For the purpose of automation, the machine is provided with an output that gives a signal when completed in single dose mode. This may be a prerequisite for integrating the machine into a loop. The machine body is made of stainless steel, suitable for food and beverage productions. The stand moves and allows freedom of work. The pump is acid and alkaline resistant. The suction filter prevents the pump from suctioning the particulate matter and the outlet valve from drops after the dosing is completed. STS809 machine works with liquids such as oil, olive oil, micellar water, rose water, lavender water and other rare cosmetics that you can find in our portfolio. Our dosing machine has a waranty period of 12 months from the date of purchase. It is made by the company “STS Electronics” Ltd. Gabrovo.